Science

Watch Live Video: NASA to Test Giant New S.L.S. Moon Rocket

[ad_1]

STENNIS SPACE CENTER, Miss. — On Thursday, NASA’s new big rocket, the Space Launch System, will make a second attempt to not go anywhere.

This test, called a hot fire, is a crucial step for the rocket, which has been in development for more than a decade. The four engines on the booster stage will ignite and run through the paces of what they would do during an actual launch to orbit — but while firmly held down on Earth.

The first time NASA attempted this hot fire test in January, the engines rumbled to life. But instead of firing for eight minutes, the rocket’s computer shut down the engines after only about one minute.

Engineers decided they needed a do-over, and today is the day for that.

When is the test and how can I watch it?

NASA said around 4:25 p.m. Eastern that the test would begin in about 10 minutes. That is within the two-hour window they had for testing that began at 3 p.m.

Just after 2:30 p.m. Eastern, NASA said the rocket had been filled with more than 700,000 gallons of propellent.

“Everything’s right on schedule,” said Bill Wrobel, a manager of the test during NASA’s live stream.

The booster stage — NASA calls it the core stage — is mounted on a giant test stand at Stennis Space Center in Mississippi. The same test stand was used in the 1960s to test the first stages of the Saturn 5. The structure was also used during development of the space shuttles.

Because of the size of the Space Launch System core stage — more than 200 feet tall and 27.6 feet wide — the test stand has been modified with an additional steel superstructure.

The engines in the S.L.S. core stage are not new, but are the ones that were used by the space shuttles. This used, space-flown hardware was refurbished and upgraded for use on the new rocket.

What happened during the last test, and what else could go wrong?

The engines shut down early — after only 67 seconds — and as a result, NASA decided it wanted to collect more data to verify that the rocket would perform properly during a real launch.

Because the same core stage is to be launched with no astronauts aboard later this year, engineers needed to make sure that Thursday’s test would not damage this section of the rocket. As a result they set some parameters as “conservative” that would stop the test if something was not right. That occurred with the power unit that swivels the nozzle on one of the engines, although officials said it would not have caused a problem during an actual launch.

A second error, indicating a “major component failure” on a different engine, was unrelated and would not have caused the test to halt or posed a problem during a launch. Because of this flaw, a faulty piece of electronic equipment was replaced.

Engineers are confident that they fixed the issues from the first step, but other glitches could occur.

A worst case would be if a malfunction led to destruction of the booster. That would add years of delay to the program and renew calls for NASA to consider alternatives.

What happens after the test?

If the test is successful, the core stage will be packed up and shipped by barge to Kennedy Space Center in Florida. There, it and other pieces of the rocket including two strap-on rocket boosters, a second stage and the Orion crew capsule will be put together.

“This test is the last test of all the flight hardware,” Mr. Jurczyk said. “It just needs to be integrated — there is testing that goes along with the integration — and then it launches.”

That launch will be the Artemis 1 mission. (In Greek mythology, Artemis is the sister of Apollo, and NASA officials have repeatedly said one of the next astronauts to step on the moon will be a woman.)

What will NASA’s Artemis 1 mission do?

[ad_2]

Sahred From Source link Science

Leave a Reply

Your email address will not be published. Required fields are marked *